Best Toilet for a Basement Bathroom Below the Drain

Six below-grade toilet picks compared on pump wattage, vertical lift and inlet count, with a named winner and the exact conditions that flip the choice to a pump-only kit.

Share

The best toilet for basement bathroom use is the SUPERFLO Macerating Toilet System with 600W Macerator Pump, because it arrives as one sealed 26.6 x 28.3 x 15.8 in unit with three inlets and needs no floor bolts. If your discharge line has to climb further than that pump can push, the maceratingflo 750W system claims lift up to 36 ft instead. Wattage is what splits this field, and the numbers here run from 500W to 1500W.

That range is not a marketing spread. It maps directly to how far above the bowl your sewer line sits, and picking a low number for a tall run means the pump strains on every flush.

Best toilet for basement bathroom at a glance

Pick Pump Vertical lift claim Price
Best overall
SUPERFLO Macerating Toilet System with 600W Macerator Pump
600W Not stated Check Price
Best premium
maceratingflo 750W Macerating Toilet System with 4-Inlet
750W 36 ft claim Check Price
Runner-up
Simple Project Macerating Toilet System with 4-Inlet&500W Macerator Pump
500W 23 ft claim Check Price
Best for beginners
MixBubole 1500W Macerator Pump with Grinding Blade Toilet
1500W 32.8 ft claim Check Price
Best for heavy use
MixBubole 600W Macerator Pump Toilet Pump Upflush to 26FT
600W 26 ft claim Check Price
Best budget pick
LOVLOY Toilet Plunger and Brush with Holder
None Not applicable Check Price

Three reasons picks got cut from this list

I cut far more listings than I kept, and the reasons fell into three groups. Knowing them tells you what to ignore while you browse.

  1. Gravity-only bowls. A standard floor-mounted toilet needs a drain below it. In a finished basement without a rough-in, that toilet is furniture. Every one got cut.
  2. Pumps with no stated lift figure and no stated wattage. If a listing gives you neither number, you cannot match it to your stack height. That is the one calculation this purchase turns on.
  3. Single-inlet units. A basement bathroom rarely stops at a toilet. Once a sink or a shower joins it, a single-inlet pump forces a second pump or a second run.

What survived is five below-grade solutions plus one accessory. Four are complete systems that include the bowl. Two are pump-only kits for a bowl you already have. The spread of published wattage across the five is 500W to 1500W, and the spread of published weight runs from 15 lb to 88 lb. Those two figures do more to shape your install day than anything else on the listings.

How high does the pump actually have to lift?

Measure from the floor of the basement to the point where your existing sewer line runs, then add the horizontal distance to it. That total is the number to shop against.

Here is why it matters more than the price position of any pick. Four of the six listings publish a vertical lift claim, and they do not agree: 23 ft, 26 ft, 32.8 ft and 36 ft. A basement floor sitting 9 ft below a main-floor stack is nowhere near any of those limits. A basement floor with a stack in the attic is a different job.

The horizontal figures matter too. MixBubole states 260 ft horizontal for its 600W pump and 328 ft for the 1500W version, and the general rule those numbers imply is that horizontal distance is cheap while vertical height is expensive. A long flat run across a basement ceiling costs you little. A climb costs you a lot.

  • Under 20 ft of lift: any of the four systems here covers it on paper.
  • 20 to 26 ft: the 500W Simple Project unit is at its stated ceiling, so step up.
  • Over 32.8 ft: only the maceratingflo 750W claims that range, at 36 ft.

Do not buy right at the stated limit. Every one of those figures is the manufacturer's claim under ideal conditions, and elbows in the discharge line eat into it.

1. SUPERFLO Macerating Toilet System with 600W Macerator Pump — Best overall

A sealed one-piece bowl and a 600W pump in a single 26.6 x 28.3 x 15.8 in footprint, with two spare inlets for the rest of the room.

SUPERFLO one-piece macerating toilet with rear pump housing — the sealed body needs no floor bolts, so it installs on finished concrete

Best for: a single below-grade bathroom with a sink and shower to drain Skip it if: your stack sits more than a floor above the toilet

This is the only pick here built as a one-piece bowl, and that shape matters below grade. Fewer joints between tank and bowl means fewer places to leak in a room you may not visit daily. SUPERFLO lists the unit as Model A-3 Inlets, model number MT-4, at 26.6 x 28.3 x 15.8 in. That 15.8 in width is the narrowest published footprint of the four complete systems here, which counts when the bathroom is carved out of a utility corner.

The three-inlet layout is the practical draw. SUPERFLO says one inlet takes the toilet and two more accept a sink, shower, bathtub or laundry drain. That covers a standard basement three-piece without a second pump. The brand also states an activated carbon filter inside the pump housing to cut odour during operation, which is an attributed claim rather than a measured one.

The installation note on the listing is worth reading twice: SUPERFLO describes this as a non-bolted, sealed system with no traditional floor mounting bolts. On a poured basement slab, skipping anchor holes is a genuine simplification.

Pros:

  • Only one-piece bowl among these picks
  • Narrowest published width of the complete systems, 15.8 in
  • Three inlets cover toilet, sink and shower
  • Non-bolted sealed install, no slab drilling
  • Carbon odour filter claimed in the pump housing

Cons:

  • No vertical lift figure published, unlike four other picks
  • Second-highest price position for a 600W pump others match
  • One inlet fewer than the two 4-inlet systems here
  • No stated warranty on the listing
  • Only one seller stocks it

2. maceratingflo 750W Macerating Toilet System with 4-Inlet — Best premium

The longest lift claim in this group at 36 ft, backed by four inlets and a stated warranty.

maceratingflo two-piece upflush toilet with white pump box behind the tank — the four inlets let one pump serve a full bathroom

Best for: the longest vertical run in a deep basement Skip it if: you need a light unit you can carry downstairs alone

If your sewer line is high and your basement is deep, this is the pick that reaches. maceratingflo claims a flush-up performance of up to 36 ft from its 750W motor, the highest published figure among these six. It ships with an extension pipe and four water inlets, model MF750T01-A, so a toilet, sink, shower and laundry standpipe can all discharge through one unit.

It is also the heaviest thing here by a wide margin at 88 lb, in a 16.5 x 28 x 31 in box. Getting 88 lb of ceramic down a basement stair is a two-person job, and that is worth planning before delivery day rather than after. The 31 in height is the tallest published dimension in this set.

maceratingflo states a soft-closing seat and a body combining stainless steel, electronics and ceramic fired at 1280°. It is the only pick whose listing spells out warranty terms: a 1-year manufacturer's replacement and a 2-year repair period. That, plus the lift figure, is what the top price position buys you here.

Pros:

  • Highest published lift claim in the set, 36 ft
  • Four inlets plus a supplied extension pipe
  • Only pick with replacement and repair terms both stated
  • Soft-closing seat included per the listing
  • 750W motor, second-highest wattage here

Cons:

  • Heaviest pick at 88 lb, awkward on stairs
  • Most expensive of the six
  • Tallest published height at 31 in
  • Two-piece design has more joints than the winner
  • Only one seller lists it

3. Simple Project Macerating Toilet System with 4-Inlet&500W Macerator Pump — Runner-up

Four inlets and a 1.6 GPF flush at the lowest wattage here, which suits a short climb to the stack.

Simple Project upflush toilet system with side pump housing — four inlets on a 500W pump serve a shallow basement bath

Best for: a shallow basement with a short lift to the stack Skip it if: the discharge run climbs past the stated 23 ft

Simple Project sizes this one honestly. The listing labels it B-23 FT Head and states a 23 ft lift from a 500W motor, which is the lowest wattage and the shortest reach among the systems here. For a walkout basement or a shallow crawl-height install, that is enough, and there is no reason to pay for headroom you never use.

You still get four water inlets and a supplied extension pipe, matching the far pricier maceratingflo on fixture count. Simple Project quotes a 1.6 GPF flush volume, the only gallons-per-flush figure published in this group, which is useful if your local code specifies a maximum. The unit weighs 85 lb and measures 30.7 x 28 x 14 in, making it the narrowest of the two-piece systems at 14 in.

Simple Project describes this as an upgraded silent version and includes a soft-closing seat. The brand also mentions 1280° fired ceramic. Treat all three as listing claims.

The honest limitation is headroom. Buy this only after you have measured, because 23 ft is not a lot of margin in a house with a tall first floor.

Pros:

  • Only pick with a published flush volume, 1.6 GPF
  • Four inlets at a mid price position
  • Narrowest two-piece body at 14 in
  • Soft-closing seat per the listing
  • Extension pipe supplied

Cons:

  • Lowest wattage here at 500W
  • Shortest lift claim of the systems, 23 ft
  • 85 lb makes stair delivery a two-person job
  • No warranty terms stated
  • Count field on the listing reads 0, which muddies what ships

4. MixBubole 1500W Macerator Pump with Grinding Blade Toilet — Best for beginners

The strongest motor in the group at 1500W and 2800 GPH, in a 17 lb box you can carry one-handed.

MixBubole 1500W macerator pump unit with multiple inlet ports — a 17 lb housing that fits under a basin

Best for: adding a bathroom to an existing basement toilet or sink Skip it if: you still need to buy the bowl and tank

This is a pump, not a toilet, and that is exactly why it suits a first-time below-grade project. It weighs 17 lb in an 11 x 16 x 7 in housing, so one person carries it downstairs and sets it behind an existing bowl. No ceramic, no stair-wrangling, no bathroom demolition.

The specifications are the boldest here. MixBubole lists 1500W at 110V-120V/60Hz, 8000 RPM, 32.8 ft vertical and 328 ft horizontal, with a rated 2800 GPH. Five water inlets and one outlet make it the highest fixture count in this set, covering toilet, sink, shower, laundry and kitchen. The brand describes a sharpened stainless steel grinding blade and a PCB time delay that stops the motor cycling too often, plus an automatic switch that starts at 3 in of water and stops at 2 in.

It is also one of only two picks with a published warranty, listed as 1 Year Manufacturer.

The catch is scope. You supply the bowl, so the total job takes two purchases and more plumbing decisions than a sealed system asks of you.

Pros:

  • Highest wattage in the set at 1500W
  • Five inlets, the most of any pick here
  • Only 17 lb, single-person carry
  • 1 Year Manufacturer warranty stated
  • Compact 11 x 16 x 7 in body fits under a basin

Cons:

  • No toilet included, so you buy a bowl separately
  • Listing quotes two different sizes, 11 x 16 x 7 in and 20 x 10 x 17 in
  • No noise figure published, unlike the 600W sibling
  • Highest draw here means a dedicated circuit is likelier
  • Only one seller lists it

5. MixBubole 600W Macerator Pump Toilet Pump Upflush to 26FT — Best for heavy use

The only pick with a published noise figure, stated at 45 dB, on a 15 lb frame.

MixBubole 600W macerator pump with four inlet ports and one outlet — a 15 lb unit rated at 45 dB for quiet basement running

Best for: a quiet basement laundry and half-bath combo Skip it if: your lift exceeds 26 ft

Noise is the complaint nobody anticipates until the pump kicks on beneath a bedroom floor. MixBubole publishes 45 dB for this unit, and it is the only listing in this group that gives a decibel figure at all. That single number is why it earns a place, especially in a finished basement with a guest room next door.

The rest of the sheet reads sensibly. It is 600W at 110V-120V/60Hz, 3000 RPM, with a 26 ft vertical and 260 ft horizontal claim and 1800 GPH. Four water inlets and one outlet handle toilet, sink, shower and laundry. At 15 lb in a 13 x 16 x 6 in housing, it is the lightest of the pump units here, and that 6 in depth is the shallowest published dimension in the set.

MixBubole says the motor uses an all-copper coil pack rather than copper-plated aluminium, and describes the same automatic switch pattern as its bigger sibling, starting at 3 in and stopping at 2 in. Warranty is listed as 1 Year Manufacture.

Against the 1500W version you lose reach and RPM. Against the complete systems, you still need a bowl.

Pros:

  • Only pick with a published noise rating, 45 dB
  • Lightest pump here at 15 lb
  • Shallowest housing at 6 in depth
  • Four inlets and a stated 1 year warranty
  • Second-cheapest of the six

Cons:

  • 26 ft lift is mid-pack, well short of 36 ft
  • No toilet bowl included
  • 3000 RPM against 8000 on the 1500W model
  • 1800 GPH is the lower of the two MixBubole flow figures
  • Only one seller stocks it

6. LOVLOY Toilet Plunger and Brush with Holder — Best budget pick

A 1.94 lb plunger-and-brush combo sized for a 5.3 in drain, and the cheapest thing on this page by a distance.

LOVLOY white plunger and brush inside a ventilated holder — a compact 6.14 x 8.62 x 7.2 in caddy for a tight basement bathroom

Best for: keeping a clog tool beside a below-grade toilet Skip it if: you were shopping for the toilet itself

Be clear about what this is. It is not a toilet and it will not move waste uphill. It is the accessory that belongs in the same room, and it is the one item here that buyers pick up far more often than the pumps.

The case for it in a below-grade bathroom is specific. A macerating unit that stalls is a mess in a room with no floor drain to spare, so a plunger within arm's reach is not optional. LOVLOY states rubber construction rather than TPR for a tighter seal, sized for a 5.3 in toilet drain, with a ventilated holder that hides both tools. The whole set weighs 1.94 lb and the caddy measures 6.14 x 8.62 x 7.2 in, model LV-628-wh01, which tucks behind a compact bowl.

The brush head has dense bristles for 360° cleaning under the rim, per the listing, and the handle is described as ergonomic and long.

Treat it as a line item on the same order, not as an alternative to any pick above.

Pros:

  • Cheapest pick on this page
  • Rubber cup rather than TPR, per the listing
  • Ventilated holder stores both tools out of sight
  • Tiny 6.14 x 8.62 x 7.2 in footprint
  • Sized for a 5.3 in toilet drain

Cons:

  • Not a toilet, and moves no wastewater
  • Cannot solve any below-grade drainage problem
  • No warranty stated
  • Sized for one drain diameter only
  • Adds nothing to your plumbing plan

Complete system or pump only: which do you need?

This is the fork in the road, and it comes before wattage. Two of these picks include the bowl. Two are pumps alone.

Go complete if the basement bathroom does not exist yet. The SUPERFLO, maceratingflo and Simple Project units arrive matched, so the bowl outlet and the pump inlet are designed for each other. You pay for that in weight: 85 lb and 88 lb for the two-piece systems.

Go pump-only if a bowl is already down there, or if you have picked one you like. The two MixBubole units weigh 17 lb and 15 lb, which changes the whole delivery and install picture. They also carry more inlets, at five and four.

  • No existing fixture, no plumbing experience: complete system.
  • Existing bowl, or a specific bowl you want: pump only.
  • Draining a laundry sink as well as a toilet: count your inlets first, then decide.

The best toilet for basement bathroom projects is usually the one that arrives as a matched set, because it removes the guesswork about whether the two halves fit.

How many fixtures can one pump handle?

Inlet count is the published number that tells you. Across these six picks it runs from three to five, and every extra inlet is a fixture you do not have to plumb separately.

The SUPERFLO offers three: toilet plus two others. The maceratingflo and Simple Project systems each offer four. The MixBubole 600W offers four. The MixBubole 1500W offers five, the highest here.

What that means in a real basement:

  • Toilet only: three inlets is plenty, and the spares stay capped.
  • Toilet and sink: three inlets still works.
  • Toilet, sink and shower: four inlets gives you a spare.
  • Toilet, sink, shower and laundry: four is exactly full, five gives margin.

Leave one inlet spare if you can. Basements grow, and a future utility sink is far cheaper to add when the port already exists than when it does not. Note also that inlet count and pump strength are independent: the 500W Simple Project unit carries four inlets while the 600W SUPERFLO carries three, so you cannot read one from the other.

What the listings do not tell you about installation

The specification sheets are decent on wattage and lift. They are quiet on the parts of the job that actually delay you.

Electrical. These are motor loads. Wattage here spans 500W to 1500W at 110V-120V, and none of the listings says whether a dedicated circuit is required. Assume you need an outlet within reach and check the draw against what your basement circuit already carries.

Discharge pipe. Two picks state a supplied extension pipe. The others do not specify what pipe, fittings or check valve ship in the box. Budget for a trip to the plumbing aisle regardless.

Venting. Nothing in this set publishes a venting requirement, and macerating systems generally need one. Your local code, not the listing, governs this.

Access for service. A macerator has a blade and a filter. The SUPERFLO carbon filter is a wear part by nature. Leave the pump housing reachable, not tiled in.

Weight on the day. Two systems weigh 85 lb and 88 lb. The pumps weigh 15 lb and 17 lb. Nobody puts stair access in a product description.

The verdict

Three tiers, three answers.

At the entry end, the MixBubole 600W Macerator Pump is the sensible spend. It is the second-cheapest pick here, it publishes a 45 dB noise rating that no other listing matches, and at 15 lb with a 6 in deep housing it fits places the ceramic systems cannot. It needs a bowl, and its 26 ft lift caps what it can serve.

In the middle sit the MixBubole 1500W pump and the Simple Project complete system. The 1500W unit brings the highest wattage and five inlets for a first-time project with a bowl already in place. The Simple Project unit brings a full toilet, four inlets and the only published flush volume at 1.6 GPF, but its 23 ft ceiling rules out tall runs.

At the premium end, the SUPERFLO 600W system takes the overall win. A one-piece sealed bowl, a 15.8 in width, three inlets and a non-bolted install make it the cleanest single purchase for a new below-grade bathroom. The maceratingflo 750W is the pick that beats it on one axis only, and it is the axis that matters most when your stack is high: a claimed 36 ft of lift against a figure SUPERFLO does not publish. Measure your run. If it clears 26 ft, go maceratingflo and plan for 88 lb on the stairs.

FAQ

Is a macerating toilet worth it for a basement bathroom?

A macerating toilet is worth it when your basement floor sits below the sewer line and breaking the slab is not realistic. Slab work means concrete cutting, excavation and repair. An upflush unit like the SUPERFLO 600W system installs on the existing floor with no mounting bolts, and its pump moves waste up to the stack instead.

What does more money buy in this category?

More money buys lift and inlets. The most expensive pick, the maceratingflo 750W, claims 36 ft of vertical reach and four inlets plus an extension pipe, and it is the only listing here that spells out both replacement and repair warranty terms. The cheapest pump, at 600W and 26 ft, covers a shorter climb for considerably less.

How much pump wattage does a below-grade toilet need?

Pump wattage needs to match your vertical run, not your budget. These picks range from 500W with a stated 23 ft lift to 1500W with a stated 32.8 ft lift. Measure floor to sewer line, add the horizontal distance, then buy above that figure rather than at it. Elbows in the discharge line reduce real-world reach.

SUPERFLO 600W or maceratingflo 750W for a deep basement?

For a deep basement, the maceratingflo 750W wins on the number that decides it: a claimed 36 ft of lift, where SUPERFLO publishes no lift figure at all. SUPERFLO answers back with a one-piece sealed body, a narrower 15.8 in width and no floor bolts. Deep basement and high stack, choose maceratingflo. Tight corner and short run, choose SUPERFLO.

What mistake do basement toilet buyers make most often?

The mistake buyers make most often is choosing on price position and discovering the lift claim falls short of their stack height. A 500W pump rated to 23 ft installed on a 28 ft run works hard on every flush. The second mistake is buying a pump-only kit without realising no bowl is included.

Measure before you order, because that one figure decides everything else on this page. Walk the basement with a tape, note the floor-to-sewer height, add the horizontal distance to the stack, and write the total down. Then read the lift claims again against your number. If you land comfortably inside 26 ft with a fresh bathroom to build, the SUPERFLO 600W system is the straightforward answer: one sealed unit, three inlets, no slab drilling and the narrowest body of the complete systems. Add the LOVLOY plunger set to the same order, because a below-grade bathroom is the last place you want to be hunting for one.

Last updated: September 22, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.